Problems with the chimney

Did you know that your chimney is under constant attack? The burning of fuel sends smoke and gases up the flue or stack. Over time, the bricks and mortar can corrode causing leaks and stains. Poorly built or unlined chimneys are most at risk. If the problem isn’t addressed, the flue can become blocked, resulting in downdraughts, even fire.

Pre-fabricated Stainless Steel Liner - Here’s how it works:

Suitable for all fuels, this twin walled flue pipe comes with a 10-year manufacturer’s warranty. With no joints to leak or crack and a small thermal mass, it’s an effective means of drawing smoke and gases from any fireplace, stove or cooker. It’s a permanent structure made of stainless steel.

The inside is smooth to discourage the build up of discharge and encourage the fast flow of effluent. The outside is corrugated to protect it from damage during installation and corrosion once in place.

How does it work?

1) The Pre-fabricated Stainless Steel flue is inserted from the top of the chiminey.

2) Once inserted, the area outside the flue is packed with Thermal Insulation Granules to keep the flue in the centre of the chimney stack.

3) Finally the flue is sealed at the top and botton to ensure it remains durable and reliable for the coming years.

The speed and simplicity of the Multiflue System means that an average chimney can be completely lined from top to bottom in a single day.

www.multiflue.com